RSD's ABEdit Software for the AB64 - Input Window
The input window sets and monitors input levels. The window itself resembles the input channels on a standard mixing console. Hovering the cursor over the fader track displays the actual attenuation in dB at that setting. Double-clicking makes the fader go to that level at the rate set by the Auto-Pan.
Click the knob and this window appears:
Hours, minutes, seconds, fraction of seconds, linear and exponential fades.
The number below the faders shows the fader settings (0-127). The M,S, and D stand for Mute, Solo, and Delay respectively. The number below D is milliseconds.
Click the Set Matrix button to open this window:
This quickly sets the matrix to some commonly used configurations.
|
Contact | TOP | Home |