RSD's SoundMan-Designer Software for SoundMan-Server/AudioBox II - Playback Window
The Playback Window chooses and plays internal audio selections.
Use the Live mode to start, stop, and shuttle selections live.
Use the Setup mode to precisely set up multiple selection starting points.
Click Go, Stop, Load, or Resume; then Selection to display a choice of audio
selections. The icon at the left changes with each command.
This button copies Live data to the Setup mode. This is useful when you
start a particular selection at a specified time and you want to put this
information into a cue.
The number at left of each selection name is the selection number.
holds over 8000 selections.
If you choose Bell 1 in channel 9,
the setup messages created by each button are:
Device 0/Playback/GO/Selection 188.8.131.52/Channel 9
Device 0/Playback/STOP/Selection 184.108.40.206/Channel 9
Device 0/Playback/LOAD/Selection 220.127.116.11/Channel 9
Device 0/Playback/RESUME/Selection 18.104.22.168/Channel 9
'ALL Channels' Buttons (in the top left)
These buttons synchronously Fast Reverse, Stop, Go and Fast Forward all enabled channels simultaneously.
FAST REVERSE sends a load message for all channels that are stopped and
not disabled, with a time of 1 second behind the current playback location.
The Camera button opens a snapshot window which allows you to capture the current status of all channels that are enabled and stopped and put them into a snapshot or a cue along with any type of playback command.
|Contact | TOP | Home|
|© Copyright 2012||
Richmond Sound Design Ltd |
Show Control |
Virtual Sound System |
Theatre Sound Design |
Themed Entertainment |
Interactive Exhibits | Soundscapes | Immersive Environments | Sonic Art | Aural Pathways | Noise masking | Digital Signage